
Energy Redefined.
nextcellenergy.com
12V 100Ah LiFePO4 Datasheet
Compact 12.8V lithium iron phosphate storage with built-in BMS protection and a battery information display.
Specifications below are transcribed from the supplied manual. Its 8S1P pack configuration conflicts with the stated 12.8V nominal voltage. A qualified installer must confirm the configuration and electrical limits against the battery label and manufacturer before connection; do not use this table alone to set a charger or inverter.
Technical Specifications
| Model | 128100 |
| Nominal Voltage | 12.8 V |
| Capacity | 100 Ah |
| Minimum Capacity | 98 Ah |
| Energy | 1,280 Wh (1.28 kWh) |
| Charge Cut-off (manual-stated) | 14.6 V |
| Discharge Cut-off (manual-stated) | 8.2 V |
| Charge Method | CC/CV |
| Standard Charge Current | ≤ 50 A |
| Max Charge Current | 100 A |
| Standard Discharge Current | 50 A |
| Max Continuous Discharge | 120 A |
| Cycle Life | ≥ 4,000 cycles (manufacturer-stated) |
| Internal Impedance | ≤ 25 mΩ |
| Dimensions (L × D × H) | 310 × 298 × 175 mm |
| Weight | 12 kg |
| Terminals | M8 |
| Operating Temperature | Charge 0°C to 45°C · Discharge −20°C to 60°C |
| Storage Temperature | 25 ± 10°C |
| Chemistry | LiFePO4 (Lithium Iron Phosphate) |
| Cooling | Self-cooling design |
Key Features
- Built-in BMS protection
- Over-charge, over-discharge and over-current protection
- High- and low-temperature protection
- Cell-voltage balancing
- Battery information display
- Compact 12 kg enclosure
Inverter Compatibility
Use equipment compatible with 12.8V nominal LiFePO4. Specific inverter compatibility must be confirmed by a qualified installer.
Wiring Instructions
- Use a qualified installer to verify equipment compatibility, cable size, overcurrent protection, isolation and grounding.
- Keep the battery switch OFF and isolate relevant power sources before wiring.
- Connect positive to positive and negative to negative using suitable cables and terminals. Prevent accidental short circuits.
- Follow the manufacturer's grounding instructions and local electrical regulations.
- Do not connect directly to AC mains or PV panel wiring, or connect batteries of different types together.
- Use equipment compatible with a 12.8V nominal LiFePO4 battery. Confirm all settings with the manufacturer; never use 48V settings.
Warranty
5-Year Limited Manufacturer Warranty (covering ≥ 4,000 cycles). Requires professional installation and COC compliance.